Go to homepage
Händler Partner

CEECOACH 1 Single Set, schwarz

Skip image gallery

€159.00*

Prices incl. VAT plus shipping costs

Set
Product number: 100-0101EU

Product information

CEECOACH keeps you optimally connected in any situation - whether you're riding, motorsport, outdoor training or professional team support. Thanks to innovative Bluetooth and wireless technology, the system enables interference-free communication without a mobile phone or internet connection.

Advantages
Simple group communication for up to 6 people
Up to 10 hours of communication with wired headsets
Role assignment over the entire distance
Up to 500 metres range

GENERAL INFORMATION per individual device
Dimensions (W x H x D) 75mm x 50mm x 24mm 
64g Clip can be snapped into place in 90° steps
Multicoloured LED

Colours
Colour of the buttons Black 
Housing colour Black

Battery
Talk time Up to 10
Standby time Up to 3 days
Operating temperatures -10°C to 45°C
Lithium-ion battery
Approx. 4 hours to full charge with standard micro USB cable

Scope of delivery
1 x CEECOACH 
1 x belt clip
1 x stereo headset
1 x USB charging cable
1 x quick start guide

Farbe: schwarz
Set: Single

CEECOACH 1

In this section we try to elaberate the most common questions about CEECOACH 1

If you want to use CEECOACH 1 and CEECOACH 2 in the same communication group all devices must have at least software version v02.02. We recommend that all shared devices have the same software version. The latest software version can be downloaded free of charge from our homepage.

If the illuminated ring on the CEECOACH flashes purple, the button lock on the CEECOACH the key lock is activated. Deactivate the key lock by briefly pressing the speech button (o) three times.’

You can activate or deactivate the keypad lock by briefly pressing the talk button (o) three times.

The pairing mode of the CEECOACH 2 is cancelled as soon as a smartphone or headset has been successfully connected.

Perform a reset of the connected devices (press all three buttons simultaneously). Now assign the roles to all participants first. Only then is the moderator assigned. Otherwise, a timeout may occur and devices that are not yet connected will not be recognised by the moderator.

If a communication circuit has been created, these settings are saved even after the the devices are switched off. The next time they are switched on, the corresponding devices automatically connect to each other. To add a new device to this circuit, it must be completely rebuilt. To do this, reset the already connected devices to the factory settings (press all three buttons simultaneously) and restart the role assignment.

If only two devices are used, participant mode is automatically activated, i.e. the Moderator and participant can speak. If the participant is only to listen, the moderator presses the talk button (o) twice.

In rare cases, there may be an error that prevents the LED from recognising that the device is fully charged. If you unplug the CEECOACH briefly from the USB charging cable and plug it back in, the LED should change to green. The charging status is also correctly displayed via the audio instructions.

No, unfortunately not. Only phone calls are supported.

Yes, you can connect an active loudspeaker to a CEECOACH. This CEECOACH device must be integrated in the call circuit or coupled with the other devices used. You can connect the active loudspeaker via the 3.5 mm jack connection. The device with loudspeaker can then be positioned at the edge to allow the audience to participate in what is being said.

The surface of the CEECOACH can be cleaned using a damp cloth or a surface disinfectant. surface disinfectant. To do this, moisten a cleaning cloth with the disinfectant and then wipe the device. The device must not be sprayed directly. Please note that the labelling (serial number in the event of a warranty claim) may be damaged if the appliance is cleaned too frequently. This note does not apply to the CEECOACH Limited Edition Isabell Werth.

You activate the pairing mode of your CEECOACH by simultaneously pressing the (+) and minus (-) buttons simultaneously until the illuminated ring flashes yellow quickly. (Optional: Pairing mode can also be cancelled by pressing the plus (+) and minus (-) buttons again simultaneously for more than 2 seconds or by switching the CEECOACH off and on).

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Zusätzliche Informationen:


pei tel Communications GmbH

Rheinstraße 15 A

14513 Teltow