Yes, you can connect an active loudspeaker to a CEECOACH. This CEECOACH device must be integrated in the call circuit or coupled with the other devices used. You can connect the active loudspeaker via the 3.5 mm jack connection. The device with loudspeaker can then be positioned at the edge to allow the audience to participate in what is being said.

If a communication circuit has been created, these settings are saved even after the the devices are switched off. The next time they are switched on, the corresponding devices automatically connect to each other. To add a new device to this circuit, it must be completely rebuilt. To do this, reset the already connected devices to the factory settings (press all three buttons simultaneously) and restart the role assignment.

If the illuminated ring on the CEECOACH flashes purple, the button lock on the CEECOACH the key lock is activated. Deactivate the key lock by briefly pressing the speech button (o) three times.’

Perform a reset of the connected devices (press all three buttons simultaneously). Now assign the roles to all participants first. Only then is the moderator assigned. Otherwise, a timeout may occur and devices that are not yet connected will not be recognised by the moderator.

If you want to use CEECOACH 1 and CEECOACH 2 in the same communication group all devices must have at least software version v02.02. We recommend that all shared devices have the same software version. The latest software version can be downloaded free of charge from our homepage.

You activate the pairing mode of your CEECOACH by simultaneously pressing the (+) and minus (-) buttons simultaneously until the illuminated ring flashes yellow quickly. (Optional: Pairing mode can also be cancelled by pressing the plus (+) and minus (-) buttons again simultaneously for more than 2 seconds or by switching the CEECOACH off and on).

In rare cases, there may be an error that prevents the LED from recognising that the device is fully charged. If you unplug the CEECOACH briefly from the USB charging cable and plug it back in, the LED should change to green. The charging status is also correctly displayed via the audio instructions.

The pairing mode of the CEECOACH 2 is cancelled as soon as a smartphone or headset has been successfully connected.

The surface of the CEECOACH can be cleaned using a damp cloth or a surface disinfectant. surface disinfectant. To do this, moisten a cleaning cloth with the disinfectant and then wipe the device. The device must not be sprayed directly. Please note that the labelling (serial number in the event of a warranty claim) may be damaged if the appliance is cleaned too frequently. This note does not apply to the CEECOACH Limited Edition Isabell Werth.

If only two devices are used, participant mode is automatically activated, i.e. the Moderator and participant can speak. If the participant is only to listen, the moderator presses the talk button (o) twice.

You can activate or deactivate the keypad lock by briefly pressing the talk button (o) three times.

No, unfortunately not. Only phone calls are supported.

Yes, you can connect an active loudspeaker to a CEECOACH. This CEECOACH device must be integrated in the call circuit or coupled with the other devices used. You can connect the active loudspeaker via the 3.5 mm jack connection. The device with loudspeaker can then be positioned at the edge to allow the audience to participate in what is being said.

If a communication circuit has been created, these settings are saved even after the the devices are switched off. The next time they are switched on, the corresponding devices automatically connect to each other. To add a new device to this circuit, it must be completely rebuilt. To do this, reset the already connected devices to the factory settings (press all three buttons simultaneously) and restart the role assignment.

If the illuminated ring on the CEECOACH flashes purple, the button lock on the CEECOACH the key lock is activated. Deactivate the key lock by briefly pressing the speech button (o) three times.’

Perform a reset of the connected devices (press all three buttons simultaneously). Now assign the roles to all participants first. Only then is the moderator assigned. Otherwise, a timeout may occur and devices that are not yet connected will not be recognised by the moderator.

If you want to use CEECOACH 1 and CEECOACH 2 in the same communication group all devices must have at least software version v02.02. We recommend that all shared devices have the same software version. The latest software version can be downloaded free of charge from our homepage.

You activate the pairing mode of your CEECOACH by simultaneously pressing the (+) and minus (-) buttons simultaneously until the illuminated ring flashes yellow quickly. (Optional: Pairing mode can also be cancelled by pressing the plus (+) and minus (-) buttons again simultaneously for more than 2 seconds or by switching the CEECOACH off and on).

In rare cases, there may be an error that prevents the LED from recognising that the device is fully charged. If you unplug the CEECOACH briefly from the USB charging cable and plug it back in, the LED should change to green. The charging status is also correctly displayed via the audio instructions.

The pairing mode of the CEECOACH 2 is cancelled as soon as a smartphone or headset has been successfully connected.

The surface of the CEECOACH can be cleaned using a damp cloth or a surface disinfectant. surface disinfectant. To do this, moisten a cleaning cloth with the disinfectant and then wipe the device. The device must not be sprayed directly. Please note that the labelling (serial number in the event of a warranty claim) may be damaged if the appliance is cleaned too frequently. This note does not apply to the CEECOACH Limited Edition Isabell Werth.

If only two devices are used, participant mode is automatically activated, i.e. the Moderator and participant can speak. If the participant is only to listen, the moderator presses the talk button (o) twice.

You can activate or deactivate the keypad lock by briefly pressing the talk button (o) three times.

Start the pairing mode of your CEECOACH. Activate the Bluetooth® function on your smartphone and start the search for Bluetooth® devices. CEECOACH is displayed as ‘CEECOACHxxxx’, including the last four digits of the serial number, which can be found on the back of the device. Now select your CEECOACH to establish the connection.

Please make sure that your headset is in pairing mode. Then check whether CEECOACH 2 is already connected to another Bluetooth® headset. CEECOACH 2 will only search for a headset if no other headset is currently connected. So if you want to connect another headset, first switch off the headset that is already connected. (Optional: You can quickly determine whether a Bluetooth® headset is connected by briefly pressing the plus button on the CEECOACH 2. If you hear the volume change tone on the wired headset, this means that no Bluetooth® headset is connected to the CEECOACH 2).

The pairing mode of the CEECOACH 2 is cancelled as soon as a smartphone or headset has been successfully connected.

You may have swapped the headsets. Please make sure that you are using the Bluetooth® headset that is connected to your CEECOACH 2. You can quickly determine whether you are using the correct Bluetooth® headset by briefly pressing the plus button on the CEECOACH 2. If you do not hear a volume change tone on your Bluetooth® headset, then you have swapped the headsets. Tip: You can prevent the headsets from being swapped by using coloured markings.

Switch on the Bluetooth® headset and set it to pairing mode (please read the headset operating instructions the operating instructions for the headset). Now start the pairing mode of your CEECOACH 2 and the device will search for a headset for approx. 60 seconds. Note: CEECOACH 2 will only search for a headset if no other headset is currently connected. So if you want to connect another headset, first switch off the headset that is already connected.

No, unfortunately not. Only phone calls are supported.

If you want to use both a headset and a smartphone with CEECOACH 2, you need to connect both devices one after the other. The order doesn't matter: you can connect your smartphone first and then your headset - or vice versa.

You can trigger the following actions by pressing the Bluetooth® headset button: Activate or deactivate the subscriber mode Accept an incoming call or end an active telephone call Please read the operating instructions for your headset for more information on the button functions of the device.

A Bluetooth® headset that is to be used with the CEECOACH must support the headset profile (HSP or HS profile). The HFP (Hands Free Profile) profile, which is used to connect to the telephone, is currently not supported by the CEECOACH.

If a connected Bluetooth® headset is switched off, CEECOACH 2 will not establish a connection when the headset is CEECOACH 2 will not establish a connection when the headset is switched on again. Many headsets automatically connect to the last connected device when they are switched on. Note: If the last Bluetooth® headset used does not establish a connection to CEECOACH 2 after switching on, you can restart the connection by briefly pressing the plus (+) and minus (-) buttons on CEECOACH 2 at the same time.

Please make sure that your headset is in pairing mode. Then check whether CEECOACH 2 is already connected to another Bluetooth® headset. CEECOACH 2 will only search for a headset if no other headset is currently connected. So if you want to connect another headset, first switch off the headset that is already connected. (Optional: You can quickly determine whether a Bluetooth® headset is connected by briefly pressing the plus button on the CEECOACH 2. If you hear the volume change tone on the wired headset, this means that no Bluetooth® headset is connected to the CEECOACH 2).

Airpods (Pro) can also be paired with your Apple iPhone in addition to the CEECOACH PLUS. To do this, simply trigger the pairing with your smartphone. If you then want to use your Airpods with the CEECOACH PLUS again, you must ‘ignore’ your Airpods in the Bluetooth® menu of your smartphone to ensure operation.

Make sure that no other devices (e.g. your iPhone) are within range of the Airpods before you start pairing / coupling with the with the CEECOACH PLUS. Alternatively, you can switch off Bluetooth® on the other devices or switch off the device before you start the pairing process with the CEECOACH PLUS. After pairing the Airpods with the CEECOACH PLUS, you can continue to use your other devices with the Airpods as usual.

You may have swapped the headsets. Please make sure that you are using the Bluetooth® headset that is connected to your CEECOACH 2. You can quickly determine whether you are using the correct Bluetooth® headset by briefly pressing the plus button on the CEECOACH 2. If you do not hear a volume change tone on your Bluetooth® headset, then you have swapped the headsets. Tip: You can prevent the headsets from being swapped by using coloured markings.

Switch on the Bluetooth® headset and set it to pairing mode (please read the headset operating instructions the operating instructions for the headset). Now start the pairing mode of your CEECOACH 2 and the device will search for a headset for approx. 60 seconds. Note: CEECOACH 2 will only search for a headset if no other headset is currently connected. So if you want to connect another headset, first switch off the headset that is already connected.

Airpods (Pro) can also be paired with your Apple iPhone in addition to the CEECOACH PLUS. To do this, simply trigger the pairing with your smartphone. If you then want to use your Airpods with the CEECOACH PLUS again, you must ‘ignore’ your Airpods in the Bluetooth® menu of your smartphone to ensure operation.

Put your Bluetooth® headset into pairing mode, refer to the instructions for your headset for this procedure if necessary. Now press the function button on your CEECOACH PLUS (button without elevation on the side) until the illuminated ring turns blue. The two devices will now pair within 30 seconds. You do not need your mobile phone for this process. Note: You do not need to pair your headset via the Bluetooth® settings in your mobile phone, but only directly with the CEECOACH PLUS.

If you want to use both a headset and a smartphone with CEECOACH 2, you need to connect both devices one after the other. The order doesn't matter: you can connect your smartphone first and then your headset - or vice versa.

Basically, the CEECOACH PLUS recognises human speech and only transmits when you speak. This is also known as Voice Activity Detection (VAD). Only during this time can background noises such as strong wind be transmitted. If this is disruptive in your application scenario (e.g. when sailing or surfing), a wind blocker can help. You can find these in any standard headset microphone shop or on our website. What is a wind blocker? You often see them on microphones for outdoor recordings on television.

You can trigger the following actions by pressing the Bluetooth® headset button: Activate or deactivate the subscriber mode Accept an incoming call or end an active telephone call Please read the operating instructions for your headset for more information on the button functions of the device.

Yes, but leave the AirPod case open until the voice connection is established.

A Bluetooth® headset that is to be used with the CEECOACH must support the headset profile (HSP or HS profile). The HFP (Hands Free Profile) profile, which is used to connect to the telephone, is currently not supported by the CEECOACH.

If a connected Bluetooth® headset is switched off, CEECOACH 2 will not establish a connection when the headset is CEECOACH 2 will not establish a connection when the headset is switched on again. Many headsets automatically connect to the last connected device when they are switched on. Note: If the last Bluetooth® headset used does not establish a connection to CEECOACH 2 after switching on, you can restart the connection by briefly pressing the plus (+) and minus (-) buttons on CEECOACH 2 at the same time.

The wired and wireless Bluetooth® headsets recommended by us have been extensively tested and ensure good voice quality. Many other commercially available headsets can be used with the CEECOACH PLUS, but there is no guarantee that the voice quality and connection will remain at 100%.

If you use multiple devices with your Airpods, the Airpods may not automatically switch to your switch to your CEEECOACH PLUS. In this case, briefly press the function button (button without elevation) on your CEECOACH PLUS. Now you should get a direct voice connection again.’

Drücke gleichzeitig die beiden äußeren Funktionstasten (1, 2) an den Stirnseiten deines CEECOACH PLUS bis der Leuchtring weiß oder grün rotiert. Nun führe die gleiche Prozedur an jedem weiteren Gerät aus, das du pairen möchtest. Du hast von Gerät zu Gerät max. 5 Sekunden Zeit, damit sie alle in die gleiche Gruppe aufgenommen werden. Am einfachsten ist es, wenn du und deine Gruppe alle gleichzeitig den Vorgang auslöst.

Airpods (Pro) can also be paired with your Apple iPhone in addition to the CEECOACH PLUS. To do this, simply trigger the pairing with your smartphone. If you then want to use your Airpods with the CEECOACH PLUS again, you must ‘ignore’ your Airpods in the Bluetooth® menu of your smartphone to ensure operation.

Make sure that no other devices (e.g. your iPhone) are within range of the Airpods before you start pairing / coupling with the with the CEECOACH PLUS. Alternatively, you can switch off Bluetooth® on the other devices or switch off the device before you start the pairing process with the CEECOACH PLUS. After pairing the Airpods with the CEECOACH PLUS, you can continue to use your other devices with the Airpods as usual.

If the LEDs at 3, 6, 9 and 12 o'clock flash simultaneously in the illuminated ring, the button lock is activated on the CEECOACH PLUS the key lock is activated. Deactivate the key lock by pressing the ‘+’ and ‘-’ buttons simultaneously for at least 3 seconds.

In order to always be able to use all functions in a group, we strongly recommend using the same software software version on all devices in a group. In general, our aim is to ensure that communication works with devices with different software versions. However, we cannot guarantee this for every update. Especially when a new release offers extensive functional enhancements.

Airpods (Pro) can also be paired with your Apple iPhone in addition to the CEECOACH PLUS. To do this, simply trigger the pairing with your smartphone. If you then want to use your Airpods with the CEECOACH PLUS again, you must ‘ignore’ your Airpods in the Bluetooth® menu of your smartphone to ensure operation.

Put your Bluetooth® headset into pairing mode, refer to the instructions for your headset for this procedure if necessary. Now press the function button on your CEECOACH PLUS (button without elevation on the side) until the illuminated ring turns blue. The two devices will now pair within 30 seconds. You do not need your mobile phone for this process. Note: You do not need to pair your headset via the Bluetooth® settings in your mobile phone, but only directly with the CEECOACH PLUS.

No, the CEECOACH PLUS is based on a new technology and can therefore only be used with other CEECOACH PLUS devices. The new communication bandwidth allows up to 16 participants in one communication centre.

Basically, the CEECOACH PLUS recognises human speech and only transmits when you speak. This is also known as Voice Activity Detection (VAD). Only during this time can background noises such as strong wind be transmitted. If this is disruptive in your application scenario (e.g. when sailing or surfing), a wind blocker can help. You can find these in any standard headset microphone shop or on our website. What is a wind blocker? You often see them on microphones for outdoor recordings on television.

Yes, but leave the AirPod case open until the voice connection is established.

Clean your CEECOACH PLUS with lukewarm water, add a mild detergent if it is very dirty. Please note that the CEECOACH PLUS must always be cleaned with clean water after contact with salt water

No, your CEECOACH PLUS is not suitable for diving. We have developed the CEECOACH PLUS in accordance with the IP67 standard. This means it is protected against splashing water and falling into water (e.g. after falling off a surfboard)

Möchtest du ein weiteres Gerät in deine Gruppe aufnehmen, ist der Pairing-Prozess für alle Geräte zu starten.

The wired and wireless Bluetooth® headsets recommended by us have been extensively tested and ensure good voice quality. Many other commercially available headsets can be used with the CEECOACH PLUS, but there is no guarantee that the voice quality and connection will remain at 100%.

If you use multiple devices with your Airpods, the Airpods may not automatically switch to your switch to your CEEECOACH PLUS. In this case, briefly press the function button (button without elevation) on your CEECOACH PLUS. Now you should get a direct voice connection again.’

If a member of your group loses radio contact, the connection will be re-established automatically, automatically re-established when this member returns to the range of your group. The CEECOACH PLUS will give you an indication of this. If two or more members of your group lose contact, these two devices remain connected and can talk to each other. After returning to the group, these members must switch their CEECOACH PLUS off and on again to return to your group. Alternatively, all participants can trigger the pairing process again. Example: In a cycling group, one team member breaks down and another participant stays with them. In this case, these two team members remain in contact with each other. After returning to the entire group, they must switch their device off and on again in order to return to the entire group.

Possible causes are: You have taken more than 5 seconds from one device to the other to pairing process or the devices were too far apart. Start the pairing process again on all CEECOACH PLUS devices. Make sure that there are less than 5 seconds from device to device at the start of pairing mode and that the distance between the devices is between 0.5 m and 10 m. Your CEECOACH PLUS may have different software versions that are not compatible with each other.